产品描述：
日本Mitutoyo三丰高度尺
-带有原点标尺-314,量程0-600mm.小分辨率0.01mm.
特点：
1. 内置原点标尺
2. 采用编码器因此无需每次开机都设置参考点
3. 由于不会产生速错误,增强了其性
4. 刚性立柱结构实现高测量
5. 带有硬质合金头的划线器
6. 大型液晶显示屏
7. 带有SPC数据输出
技术参数 显示： 液晶显示
功能： 调,ABS/INC测量模式转换,资料保持,电源开/关,英制/公制转换(限英制/公制型)
电池： SR44锂电池(1个)(938882)
电池寿命： 连续使用情况下约为20000小时
响应速度：无限
： 低电压
工作温度： 0~40度
ABSOLUTE Digimatic Height Gage Seri 570-with ABSOLUTE Linear Encoder.
Seri 570
FEATUR:
Built in ABSOLUTE linear encoderThis encoder eliminat the necsity of setting the reference point at every power-on. It has improved reliability because over-speed error will occur.
- Rigid column structure ensur high measuring accuracy.
- With large ooth slider feed wheel.
- Carbide-tipped scriber is provided.
- With SPC data output.
Technical Data
Rolution: 0.01mm or .0005"/0.01mm
Display: LCD, 6-di
Length standard: ABSOLUTE electrostatic capacitance te linear encoder
Max. rponse speed: Un limited
Battery: SR44 (1 pc.),938882
Battery life: Approx. 20000 hours under rmal use
Function
Origin setting, ABS/INC switching,
Power ON/OFF, Data hold, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error
Standard Scriber Provided
Metric models: Carbide-tipped scriber (07GZA000), scriber clamp (05GZA033)
Inch/Metric models: Carbide-tipped scriber
Optional Accsori
905338: SPC cable (40” / 1m)
905409: SPC cable (80” / 2m)
953638: Holding bar for tt indicator (length: 50mm)
953639: Holding bar for tt indicator (length: 2”)
902053: Swivel clamp used with holding bar (metric)
900322: Swivel clamp used with holding bar (inch)