询价
溶融指数仪 溶融指数仪价格 东莞溶融指数仪 全自动融指数测定仪 融指数设备厂家 塑料溶脂机 颗粒融指数仪器 pe融指数设备 pp熔融指数仪 ABS融指数仪聚丙烯熔融指数仪 聚碳酸酯熔融指数仪 聚乙烯熔融指数仪 聚苯乙烯融指数仪 聚丙烯熔融指数仪 树脂融指数仪 聚碳酸酯融指数仪 溶体流动速率仪 塑料溶体流动速率仪 MFR值测定仪
XNR-400A溶融指数仪产品简介
用于测定各种高聚物在粘流状态时熔体流动速率MFR值,它既
适用于熔融温度较高的聚碳酸酯、聚芳砜、氟塑料、尼龙等工程
塑料,也适用于聚乙烯(PE)、聚苯乙烯（PS）、聚丙烯(PP)、ABS
树脂、聚甲醛（POM）、聚碳酸酯(PC)树脂等熔融温度较低的塑料
测试,广泛地应用于塑料生产,塑料制品、石油化工等行业以及相关
院校、科研单位和商检部门。
XNR-400A溶融指数仪适用于《GB/T3682-2000热塑性塑料熔体
质量流动速率和熔体体积流动速率的测定》标准中对规定的热塑
性塑料熔体质量流动速率的测定,本标准等同采用了ISO 1133：1997
的规定。 主体为台式结构、设计合理性能稳定、外形美观、操作
方便,采用了、高控制仪表具有采样高,控制速率快的特
点,使用了模糊的PID算法进行恒温控制。
一、合标准
该仪器执行/T5456标准要求，适用GB/T3682、ASTM D1238、ISO1133等标准。
GBT 3682.1-2018 塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 部分：标准方法
GBT 3682.2-2018 塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第2部分：对时间-温度历史和(或)湿度敏感的材料的试验方法
二、技术参数
1、显示方式：液晶显示。
2、测量方式：质量法（MFR）。
3、恒温范围：室温—450℃任意一点均可恒温。(可自己修正温度)
4、温度：±0.01℃。
5、温度分辨率：0.01℃。
6、计时范围：0.01——999.00秒。
7、计时：0.01秒。
8、切料方式：自动、手动、时控三种切料方式。
9、自动计算融指数，配有打印机，可打印试验。
10、口模材质：碳化钨。
11、口模直径：2.095 mm。
12、 熔体流动速率测试范围：0.001~3000g/10 min
13 控制方式：双温控（桶模上、下分别控温）+SSR+电热片
14 升温时间：10 分钟
15 口模塞规：孔径2.0904/2.1006 mm
16活塞：Φ( 9.4742 ±0.007) mm 活塞头长度6.35 mm土0.10 mm
下边缘半径0.4—（0.0-0.1）mm 的圆角，上边缘去除尖角。
活塞杆细环形参照标线相距30 mm士0.2 m m
17 细孔模: 碳化钨材质
外径：( 9.55 ±0.005) mm
孔径：( 2.0955 ±0.0051) mm
长度：( 8.00 ±0.001 ) mm
18具有温保护功能，温度到达限值侯自动停止加热。
Melt index apparatus melt index, the price of dongguan melt index instrument automatic melt index tester equipment manufacturer plastic particles dissolve grease machine melt index instrument PE melt index equipment pp melt index of ABS index meter polycarbonate melt index polropylene melt index instrument meter polyethylene melt index instrument polystyrene melt index instrument polropylene melt index, resin index instrument meter melt flow rate meter polycarbonate melt index plastic melt flow rate instrument meter MFR value
XNR - 400 - a melt index instrument product introduction
Used for testing all kinds of high polymer melt flow rate when viscous flow state MFR value, it is
Suitable for high melting temperature of polycarbonate, aromatic sulfone, fluorine plastic, nylon and other projects
Plastic, can also be applied to polyethylene (PE), polystyrene (PS), polropylene (PP), ABS
Resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic
Testing, widely used in plastic production, plastic products, petrochemical industry and related
Colleges and universities, scientific research units, and the commodity inspection department.
XNR - 400 - a melt index instrument applies to the GB/thermoplastics melt T3682-2000
M flow rate and melt volume flow rate in the national standard determination of thermoplastic
Sex determination of the plastics melt m flow rate, equivalent to this standard adopted the ISO 1133:1997
The provisions of the.Subject for desk structure, reasonable design, stable and reliable performance, good appearance, operation
Convenient, the high performance and high precision control instrument with high sampling precision, control rate
Point, the use of the fuzzy PID algorithm for temperature control.
XNR - 400 - a melt index instrument has the following features:
1, heating up fast, overshoot is a very all amount
2, constant temperature precision is high
3, after packing, can quickly restore the constant temperature condition
4, manual and automatic test method can be used
5, easy test parameters calibration and correction
6, with the printer
XNR - 400 - a melt index of main technical parameters
1, extruded part
Discharging mouth diameter: Φ 2.095 + / - 0.005 mm
The discharging mouth length: 8.000 + / - 0.025 mm
Charging tube diameter: Φ 9.550 + / - 0.025 mm
Charging barrel length: 152 + / - 0.1 mm
The piston rod head diameter: 9.475 + / - 0.015 mm
The piston rod head length: 6.350 + / - 0.100 mm
2, standard test load (8)
3, temperature range: room temperature - 400 ℃
4, the constant temperature precision: plus or minus 0.5 ℃
5, display resolution: 0.1 ℃
6, temperature recovery time: less than 4 minutes
7, blanking mode: manual or automatic blanking, first time control.
8, constant temperature time: can work continuously tens of thousands of hours
9, automatic printing, automatic melting index calculated results
10, overall dimensions: width * high thick = 250 * 350 * 350
11, power supply voltage: AC220V plus or minus 10% 50 hz
12. Other accessories: 1 scraper, charging a funnel, cleaning rod 1, plunger, a feeding, mouth mold cleaning rod 1, level 1, one viewer.
