光学系统Optical system
- 谱线Optical lin
- 控制、电子采集和数据读出系统Control, Acquisition Eleronics and read out system
- 火花源Spark Source
- 火花台Spark Stand
- 软件Software
- 控制中心：电脑Control station : computer
组成部分的描述：
DCRIPTION OF THE COMPONENTS:
- 光学系统OPTICAL SYSTEM
v 多块CCD检测器系统，根据应用需要多达16块CCD检测器
Multi High Rolution CCD Multi deteors (Charge Coupled Device) system with up to 16 CCD solid state deteors depending on the application
v 每块CCD 3,648像素
Each CCD has 3,648 aive elements (pixels equivalent)
v 58,368像素的分辨率(16 x 3,648像素)
Rolution of full range 58,368 aive elements (pixels) (16 x 3,648 pixels)
v 全息衍射光栅，光栅刻线1200或2700或3600条/mm
High lumisity holographic grating with 1200 or 2700 or 3600 groov per mm
v 温度稳定系统
Stabilized against fluuations in temperature
v 采用材料应对漂移
Special material for drift free
v 焦距：500 mm
Focal length 500 mm for all optical systems
v 谱线波长：140 - 800 nm由衍射光栅的选择决定。光栅的选择由制造商根据分析元素和分析程序来决定
Speral optical wavelength 140 – 800 nm depending on seleed diffraion grating. Grating seleion is made by manufaurer depending on ytical programs and elements
v 全光学系统自动描迹
Automatic profiling full optical system
v 密闭的真空光学室可以避免灰尘、光线的干扰
Vacuum tight optical chamber sealed against light and dust
- 谱线OPTICAL LIN
v SCP覆盖了全元素分析范围，可根据具体需要分析相应的元素
SCP can be equipped with all the needed speral lin basing on ytical programs requted
v 光学系统包括固态检测器能够测量样品所发出的全谱
Optical system includ full range multi-chanel CCDs solid state deteors able to measure the whole optical spera emitted by all elements in the sampl
v 并且为将来可能的升级，增加分析线（元素）方便
It’s always possible to integrate new speral lin (elements) for future upgrade
v 可现场增加分析程序
Possible on site addition of ytical programs
- 控制、电子采集和数据读出系统CONTROL, ACQUISITION ELERONICS and READ OUT
v 电子系统具有微处理器控制的多通道积分和数据系统采集功能
Eleronic system with integrators multi-channels and Data System Acquisition PC controlled by microprocsor
v 16位模数转换器
High speed 16 Bit ADC
v ISP混合信号Flash微控制器100MHz
Mixed Signal ISP Flash MCU 100 MHz
v 多种连接源
Serial Source Interface
v 读出及U借口支持快速数据控制与处理系统
High speed readout with high speed interface U for fast data procsing and controlling the system
v 多16块CCD模块，由制造商根据应用情况选择
Up to 16 input for CCD modul. CCD modul seleed by manufaurer
- 火花源SPARK SOURCE
v 全自动控制火花源
Full automatic controlled source
v 半导体控制放电激发
Solid state spark source semiconduor controlled.
v 1到100 A等离子体电流
Plaa current from 1 to 100 A
v 放电参数由保护
The discharge parameters are proteed by pword
v 的分析要求可有不同的激发参数
Variable discharge parameters for individual ytical tasks
v 火花光源放电稳定，不受供电系统波动的影响
The spark source is stabilized against variations of the power supply
v 激发参数由激发线和分析程序标定和控制
Excitation parameters configurated and controlled according to excitation lin and ytical programs
v 火花源可有多种参数设置
Spark source with variable parameters
v 火花频率: 200到to 1000 Hz (可控)
Spark Frequency: 200 up to 1000 Hz (controllable)
v 火花持续时间10-10000 us (可控)
Spark time 10-10000 us (controllable)
- 火花台SPARK STAND
v 开放式的火花台可以分析测试重达20Kg的各种形状的样品
The open universal spark stand allows to yse sampl up to 20 Kg and suitable for sampl in different forms
v 电易于拆卸维护
The elerode is easily removable for maintenance
v 氩气吹扫火花台，低氩气消耗
Argon flushed spark stand with minimum consumption of Argon
v 使用便捷的样品夹支持快速样品更换
Quick change with simple digned sample clamp for fast sample throughput
v 不同样品的适配器可满足各种样品的需求（可选）
all adapters for different sampl are also available for various kind of sampl(options)
