您好,欢迎来到维库仪器仪表网 网站登录 | 免费注册 | 忘记密码

咨询电话SERVICE LINE

0755-89231580

13823195664

商铺首页 公司介绍 公司动态 产品中心 技术资料 在线留言 联系我们
PLH120/PLH250高线性直流电源
PLH120/PLH250高线性直流电源
  • PLH120/PLH250高线性直流电源
扫一扫

扫一扫
进入手机店铺

PLH120/PLH250高线性直流电源

产品价格:
电议
产品型号:
PLH120/PLH250
供应商等级:
金牌会员11年
经营模式:
代理商
企业名称:
深圳市金启泰电子有限公司
所属地区:
广东省深圳市
发布时间:
2013/11/19 16:18:17

0755-89231580      13823195664

黎文辉先生(联系我时,请说明是在维库仪器仪表网看到的,谢谢)

买家还在看

企业档案

深圳市金启泰电子有限公司

会员11年营业执照已上传

经营模式:代理商

所在地:广东省 深圳市

主营产品:台湾Chroma电源设备,北斗GPS双模信号模拟器,模拟数字电视信号发射器,数字电视调制卡,高清视频信号发射器。

产品搜索

手机访问

扫一扫
进入手机店铺

  • 品牌/商标:英国TTi
  • 企业类型:贸易商
  • 新旧程度:二手
  • 原产地:英国

英国TTi PLH120/PLH250高线性直流电源

TTi PLH系列高性能线性直流稳压电源

它是基于低电压的线性电源新的PL系列(提供高达60V)具有相同的套管式和类似的输出功率。然而,某些功能的高电压的相关是不同的。

PLH系列的真正的模拟控制,结合新的数字为基础的方便的特点。

产品特点:

  • 为便于使用真实的模拟控制
  • S -锁功能立即锁定设置
  • 减少不确定性的计量
  • 平均低电流范围,电流表
  • 直流输出开关和“视图限制”按钮
  • 为了获得性能的线性调节
  • 超紧凑的设计使用更少的空间
  • 比其他线性供应更高的能源效率
  • 安全接线柱连接端子

产品型号/规格:

  • PLH120 - 0 to 120V at 0 to 750mA
  • PLH250 - 0 to 250V at 0 to 375mA
    Lower Voltage Models - Go Here for New PL and PL-P Series

PL068 - 0 to 6V at 0.to 8A
PL155 - 0 to 15V at 0 to 5A
PL303 - 0 to 30V at 0 to 3A
PL601 -  0 to 60V at 0 to 1.5A
PL303QMD - 2 x (0 to 30V at 0 to 3A)
PL303QMT - 2 x (0 to 30V at 0 to 3A) plus 0 to 6V at 0.to 8A

OUTPUT SPECIFICATIONS

Voltage/Current Levels

PLH120 - 0 to 120V / 0.01mA to 750mA (90W max.)
PLH250 - 0 to 250V / 0.01mA to 375mA (94W max.)
Note: Actual maxima for voltage and current are typically 1% greater than the figures given above
except for the voltage control on the PLH250 which is limited to 250.0V.

Output Setting & Control

Voltage Setting: By coarse and fine controls.
Current Setting: By single logarithmic control.
Low Current Range: Reduces max. current to 75mA and increases resolution to 0.01mA.

Output Mode: Constant voltage or constant current with automatic cross-over.
CC indicator lit in constant current mode.

Output Switch: Electronic, non isolating. Preset voltage and current limit displayed when Output is off.
Output rise time no load <20ms.

View Settings: With the output On, the meters show actual voltage and current.
The preset levels can be viewed and adjusted at any time by pressing the View Settings button.

V-Span (Voltage Span Control)

The voltage adjustment range can be controlled by digital setting of the end-stop values of
the coarse voltage control to any desired values. The range for Vmax is 1V to 120V or 250V depending on model.
The range for Vmin is 0 to (Vmax – 1V).

S-Lock (Settings Lock)

Voltage and current settings can be locked by a single button press. Lock accuracy is equal to the meter accuracy (see Meter Specification).

Output Performance

Ripple & Noise: Normal mode voltage: <2mV rms and 10mV p-p
Normal mode current: <10uA rms ; <1uA rms on 75mA range
Common mode current: <20uA rms
Load Regulation: Voltage - <0·01% + 10mV.
Current - typically 0·01% + 50μA.
Line Regulation: Voltage <0·01% + 10mV for 10% line change.
Current <0·01% + 50μA. for 10% line change.
Transient Response: <250μs to within 50mV of setting for a 90% load change.
Temp. Coefficient: Voltage: typically <(50ppm + 2mV)/°C
Current: typically <(100ppm + 0.1mA)/°C;
<(100ppm + 0.01mA)/°C on 75mA range.

Output Protection

Output Protection: Output will withstand forward voltages of up to rated output voltage.
Reverse protection by diode clamp for currents to 3A.
OVP and OCP Trips: Voltage or current measured to be in excess of 105% of the rated maximum will cause the output to trip off.
Over-temperature: Output trips off for over-temperature.
Safety Interlocks: Operations that could cause an unexpected change in voltage or current settings are interlocked with the output switch.

Output Connections

Output Terminals: Universal 4mm safety binding posts on 19mm (0·75”) spacing.
Terminals can accept fixed shroud 4mm plugs, standard 4mm plugs, fork terminals and bare wires.
Remote Sense
Sense Selection: Voltage sensing is selected as Local or Remote by front panel switch.
Sense Terminals: Sprung loaded screw-less terminals.

METER SPECIFICATIONS

Display Type: Dual 4-digit meters, 10mm (0·39”) LED.
Voltage Meter
Resolution: 100mV
Accuracy: ± (0·1% of reading + 100mV)
Current Meter
Resolution: 0.1mA (0·01mA on 75mA range)
Accuracy: ± (0·3% + 0.3mA); ± (0·3% + 0·03mA) on 75mA range
Meter Damping: Normally 20ms, switchable to 2 sec for averaging rapidly varying loads

GENERAL SPECIFICATIONS

Input
AC Input: 230V AC or 115V AC ± 10%, 50/60Hz. Installation Category II
Input Power: 280VA max.
Temperature & Environmental
Operating Range: +5oC to +40oC, 20% to 80% RH
Storage Range: -40oC to + 70oC
Environmental: Indoor use at altitudes up to 2000m, Pollution Degree 2.
Cooling: Intelligent variable-speed low noise fan assists convection.
Safety & EMC
Safety: Complies with EN61010-1
EMC: Complies with EN61326
Physical
Size: PLH models - 107mm x 131mm (? rack 3U) x 288mm,
PLH-P models - 107mm x 131mm (? rack 3U) x 315mm,
(sizes exclude feet, knobs and terminals).
Weight: PLH models - 4·9kg;
PLH-P models - 5.0kg

OPTIONS

Rack Mount (RM450)
19 inch 4U rack mount suitable for up to four PLH series power supplies. Alternatively they
can be mixed with the lower voltage New PL series in a single rack with up to four single
power supplies, two dual power supplies, or any mixture. Blanking plates are provided for
unused positions. The 4U height provides limited ventilation space above and below the power
supplies.

联系方式

深圳市金启泰电子有限公司

联系人:
黎文辉先生
手机:
13823195664/15113468240
传真:
0755-89328875
所在地:
广东省 深圳市
类型:
代理商
地址:
深圳市龙岗区南湾街道平吉大道1号建昇大厦A座613-2室

服务热线

0755-89231580

QQ:365418015 QQ:624848027 
提示:您在维库仪器仪表网上采购商品属于商业贸易行为。以上所展示的信息由卖家自行提供,内容的真实性、准确性和合法性由发布卖家负责,请意识到互联网交易中的风险是客观存在的。 请广大采购商认准带有维库仪器仪表网认证的(金牌会员、VIP会员、至尊VIP会员、百维通)供应商进行采购!
个人中心
商家客服

商家客服
专业的人工客服服务

QQ:365418015 QQ:624848027 

商家电话

人工服务电话
0755-89231580

顶部
立即询价
手机访问

扫一扫
进入手机店铺