供应划格器

The CC1000 is a test to measure the adhesion of dry coats of paint on their substrate by means of a series of 6 / 11 blades. Two series of Lines are cut at right angles to obtain a pattern of 25 / 100 squares. The ruled area is evaluated (by using a table chart) after a short treatment with a stiff brush, or adhesive tape (hard substrates).
The round cutting knife of the CC1000 has eight cutting sides that can be changed easily. The self-adjusting knife-holder of the CC1000 ensures equal pressure on the cutting knife.
The testkit contains a softgrip handle, a hardened steel cutter (te may vary, see above), a nylon brush, an illuminated magnifier, adhesive tape and one 4 mm. Allen key
Use:
DIN ISO 2409 :2003:
1 mm. spacing for coatings up to 60 µm on hard substrates
2 mm. spacing for coatings up to 60 µm on soft substrates
2 mm. spacing for coatings from 61 to 120 µm on both hard and soft substrates
3 mm. spacing for coatings from 121 µm to 250 µm on both hard / soft substrates

ASTM 3359:
1 mm. spacing for coatings up to 50 µm
1,5 mm. spacing for coatings from 50 to 125 µm

Tapecan be ordered separately as well.

VF1839
Te CC1000, teeth distance: 1 mm. acc. to DIN-ISO, 6 teeth

VF1840
Te CC1000, teeth distance: 1,5 mm. acc. to DIN-ISO, 6 teeth

VF1842
Te CC1000, teeth distance: 2 mm. acc. to DIN-ISO, 6 teeth

VF1844
Te CC1000, teeth distance: 3 mm. acc. to DIN-ISO, 6 teeth

VF1846
Te CC1000, teeth distance: 1 mm. acc.to ASTM, 11 teeth

VF1847
Te CC1000, teeth distance: 1,5 mm. acc.to ASTM, 11 teeth