| SPECIFICATIONS |
Frequency |
Frequency Range: | 0.2Hz to 20MHz in 8 overlapping decade ranges with fine adjustment by a vernier. |
Vernier Range: | >10:1 on each range. |
Vernier Accuracy: | Typically ?5% of full scale. |
Sweep Mode External |
Input Impedance: | 82 kW |
Sweep Range: | Typically > 20:1 |
Input Sensitivity: | Typically 0 to 2V for 10:1 sweep |
Max. Input Voltage: | ?10V |
Max. Slew Rate of sweep voltage: | 0.1V/us |
Operating Modes |
(Specifications apply for the top decade of each frequency range and output 10V peak-to-peak into 50W termination). |
Sine |
Distortion: | Typically 2% on 200, 2k and 20k ranges. |
Amplitude Flatness: | ?0.2dB to 200kHz; ?2dB to 20MHz. |
Triangle |
Linearity: | Typically 99% on kHz ranges. |
Squarewave |
Rise and Fall Times: | <22ns |
DC Range: | ?10V from 50W |
Symettry |
Symmetry Range: | Typically variable from 1:6 to 6:1 up to 500kHz. |
Outputs |
50 Ohms |
Three switch-selectable ranges with 26dB vernier control within each range. |
0dB Range: | 1V to 20V peak-to-peak (0.5V to 10V into 50W). |
-20dB Range: | 100mV to 2V peak-to-peak (50mV to 1V into 50W) |
-40dB Range: | 10mV to 0.2V peak-to-peak (5mV to 0.1V into 50W) |
DC Offset Range: | ?10V from 50 W. DC offset plus signal peak limited to ?10V (?5V into 50W). DC offset plus waveform attenuated proportionally in -20dB and -40dB position. |
TTL/CMOS |
Capable of driving 4 standard TTL loads. |
General |
Power: | 230V or 115V nominal 50/60Hz, adjustable internally; operating range ?14% of nominal; 30VA max. Installation Category II. |
Operating Range: | +5oC to + 40oC, 20% to 80% RH. |
Storage Range: | -10oC to +65oC |
Environmental: | Indoor use at altitudes to 2000m, Pollution Degree 1. |
Electrical Safety: | Complies with EN61010-1. |
EMC: | Complies with EN55011 and EN50082-1. |
Size: | 220(W) x 82(H) x 230(D) mm, (10.3 x 3.4 x 9.2") excluding feet. |
Weight: | 1.5 Kg (3.3lb). |
