您好,欢迎来到维库仪器仪表网 网站登录 | 免费注册 | 忘记密码

咨询电话SERVICE LINE

0755-89231580

13823195664

商铺首页 公司介绍 公司动态 产品中心 技术资料 在线留言 联系我们
I-prober 520电流探头,英国TTi  Iprober 520测试探头
I-prober 520电流探头,英国TTi  Iprober 520测试探头
  • I-prober 520电流探头,英国TTi  Iprober 520测试探头
扫一扫

扫一扫
进入手机店铺

I-prober 520电流探头,英国TTi Iprober 520测试探头

产品价格:
电议
产品型号:
I-prober 520
供应商等级:
金牌会员11年
经营模式:
代理商
企业名称:
深圳市金启泰电子有限公司
所属地区:
广东省深圳市
发布时间:
2013/11/19 14:29:36

0755-89231580      13823195664

黎文辉先生(联系我时,请说明是在维库仪器仪表网看到的,谢谢)

买家还在看

企业档案

深圳市金启泰电子有限公司

会员11年营业执照已上传

经营模式:代理商

所在地:广东省 深圳市

主营产品:台湾Chroma电源设备,北斗GPS双模信号模拟器,模拟数字电视信号发射器,数字电视调制卡,高清视频信号发射器。

产品搜索

手机访问

扫一扫
进入手机店铺

  • 品牌/商标:英国TTi
  • 企业类型:贸易商
  • 新旧程度:全新
  • 原产地:英国

英国TTi   I-prober 520电流探头

Aim I-prober 520 positional current probe

I-prober 520 - PCB track Touch & Measure

  Current measurement from insulated probing of conductor
  Suitable for observation and measurement of current in
    PCB tracks, component leads and ground planes
  Wide dynamic range of 10mA to 20A peak to peak
  Wide bandwidth of DC to 5MHz
  Low noise figure equivalent to <6mA rms at full B/W
  Safety rated to 300V Cat II (600V Cat 1)
  Suitable for connection to any oscilloscope
  High accuracy general purpose H-field probe
  Converts to ?closed magnetic circuit? current probe

  

 More Information: Data Sheet

Technical Specifications

General Specifications (All Modes)

Output Signal
Maximum Output: ? 10V .
Oscilloscope Input: Suitable for an input impedance of 1MOhms in parallel with < 30pF.
Trace Position: Wide range DC offset control within control box.
Safety
Max. Circuit Voltage: 300V Cat II (on AC line circuits). 600V Cat 1 (on uncategorised secondary circuits inside equipment).
Max. Tip Temperature: 150oC maximum allowable temperature at probe tip.
Conformance: Complies with EN61010-1 & EN61010-031
Bandwidth Control
Switch Position:           Full                500kHz                2Hz
Nominal Bandwidth: DC to 5MHz     DC to 500kHz      DC to 2Hz
Risetime:                    <70ns             700ns                 175ms
Aberrations:                <+/-5%             <+/-1%                  <+/-1%
Noise (Typical)*:        6mA rms        3mA rms           1.5mA rms
* This is the noise level for current measurement using the Toroid attachment. For PCB track measurement the equivalent noise will depend upon the track width and gain setting but will be similar to the Toroid measurement figure for a track width of 0.5mm.
HF Performance (bandwidth switch at Full)
Propagation Delay: 60ns typical (to 10%).
Bandwidth: DC to 5MHz (small signal)
Slew Rate: 15A/us (equivalent).
Overload Indication
Indicator Threshold: Indicator LED within control box will light if output voltage exceeds +/- 10V or if large magnetic fields cause the system to saturate.
Power Source
Power Supply: 5.2V at up to 5 watts from AC line adaptor (supplied).
Mechanical
Probe Dimensions: 155mm x 38mm x 28mm max; 2.8mm x 1.8mm at tip
Cable Length: 2m from probe tip to output BNC
EMC
Conformance: Complies with EN61326

Magnetic Field Measurement (Mode = Field)

Scaling Factor: 250uT (or 200A/m) per Volt.
Accuracy and Linearity: +/-3%
Maximum Field: +/-2.5mT (2000A/m).

Current Measurement using Toroid (Mode = Wire)

Scaling Factor: 1 Amp per Volt.
Accuracy and Linearity: +/-5%
Current Range: +/-10mA to +/-10A (DC + peak)
Max. Wire Diameter: 3.5mm (unbroken) or 6mm (end fed)

Current Measurement in PCB Tracks (Mode = PCB Track)

Scaling Factor: Adjustable to 1 Amp per Volt for track widths 0.2mm to 3.5mm (0.007" to 0.14") and 2 Amp per volt for track widths 3mm to 6.5mm (0.125" to 0.25") using Calibrator and compensation graph.
Sensor Spacing: 0.7mm distance from sensor to PCB track set by probe design.
Calibrator: Built-in calibrator within the control box providing an AC or DC calibration current through a 0.5mm track.

联系方式

深圳市金启泰电子有限公司

联系人:
黎文辉先生
手机:
13823195664/15113468240
传真:
0755-89328875
所在地:
广东省 深圳市
类型:
代理商
地址:
深圳市龙岗区南湾街道平吉大道1号建昇大厦A座613-2室

服务热线

0755-89231580

QQ:365418015 QQ:624848027 
提示:您在维库仪器仪表网上采购商品属于商业贸易行为。以上所展示的信息由卖家自行提供,内容的真实性、准确性和合法性由发布卖家负责,请意识到互联网交易中的风险是客观存在的。 请广大采购商认准带有维库仪器仪表网认证的(金牌会员、VIP会员、至尊VIP会员、百维通)供应商进行采购!
个人中心
商家客服

商家客服
专业的人工客服服务

QQ:365418015 QQ:624848027 

商家电话

人工服务电话
0755-89231580

顶部
立即询价
手机访问

扫一扫
进入手机店铺