GSP-827 2.7GHz 频谱分析仪
| 特点 |
| 性能: 频率范围: 9kHz~2.7GHz. 输入范围: -100dBm~+20dBm 平均杂讯位准: -100dBm 功率量测: ACPR/ OCBW/CH Power 分割视窗: Simultaneous Measurements in Two Separate Frequency Spans. 解析频宽(RBW):3kHz, 30kHz, 300kHz, 4MHz 轻巧可携性: 4.5公斤轻巧设计 AC/DC/Battery 操作模式 100组量测波形/操作状态记忆体, 并可于储存档案同时纪录日期/时间 简易操作: 10组游标量测功能: Delta Mode, Peak Search, Peak TrackTrace Function: Dual-Trace Display, Peak Hold, Freeze, Average, Trace Math 限制线功能: Upper/Lower Limit with P/Fail 测试 触发功能: Video/ External 时间/日历功能: Time/Date Stamp in Saved Data 提供宽广的外部参考时脉输入端: 1MHz…19.2MHz |
频率 | |
| 频率范围 | 9kHz-2.7GHz |
| 老化率 | &plun; 5ppm, 0~50°C, 1ppm/年 |
| 频距范围 | 2kHz to 2.5GHz in 1-2-5 顺序, 全展频, 展频 |
| 相位杂讯 | -85dBc/Hz @1GHz 20kHz (典型值) |
| 扫描时间范围 | 50s~25.6s |
解析频宽 | |
| 解析频宽范围 | 3kHz, 30kHz, 300kHz, 4MHz |
| 解析频宽度 | 15% |
| 影像频宽范围 | 10Hz to 1MHz in 1-3 顺序 |
振幅 | |
| 量测范围 | -100dBm ~ +20dBm: 1MHz~2.5GHz @ 3k RBW -95dBm ~ +20dBm: 2.5GHz~2.7GHz @ 3k RBW -70dBm ~ +20dBm: 150k ~ 1MHz @ 3k RBW -65dBm ~ +20dBm: 50k ~ 150kHz @ 3k RBW |
| 过载保护 | +30dBm, &plun;25VDC |
| 参考位准范围 | -30dBm to +20dBm |
| 显示范围 | 75dB |
| 度 | &plun;1.5dB @100MHz |
| 频率平坦度 | &plun;1.5dB |
| 显示范围线性度 | &plun;1.5dB over 70dB |
动态范围 | |
| 平均杂讯位准 | -100dBm : 1MHz to 2.5GHz -95dBm : 150k~1MHz, 2.5GHz to 2.7GHz -75dBm : 150k~1MHz -65dBm/Hz: 50k~150kHz |
| 三谐交互调变失真 | < -70dBc @-40dBm 输入时 |
| 谐波失真 | <-60dBc, RF输入< -40dBm |
| 旁生讯号 | < -60dBc, Down from Reference Level 150k to 2.7GHz |
一般性能 | |
| 显示器 | 640 x 480单色高解析度LCD |
| 记忆体 | 100组轨迹或面板设定 |
| 游标 | 10组游标, 提供 Delta , Peak , Marker Track |
| 轨迹侦测 | Peak, Maximum hold, Freeze, Trace math |
| 功率量测 | 相邻通道功率(ACPR) 占用频宽(OCBW) 通道功率(CH Power) |
接头 | |
| RF 输入端 | 类型: N-母座, 50Ω RF输入之VSWR: <1.5:1 @0dBm Reference Level |
| 外部参考时脉输入端 | 类型: BNC-母座 1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2M |
| 参考时脉输出端 | 类型: BNC-母座, 10MHz |
| 直流电源输入端 | 插口: 5.5mm, 12V |
| RS-232C | Sub-D 9针-母座 |
| 电源电压 | 交流 100~240V, 48~63Hz |
配件 | |
| 电源线 x1 使用手册 x1 | |
| 尺寸以及重量 | 330W x 170H x 340D (mm), 约. 4.5kg |
GSP-827 2.7GHz Spectrum yzer
| Opt. 01 | Tracking Generator | Tracking Generator- Frequency Range: 9k~2.7GHz- Amplitude Range: -50dBm~0dBm- Amplitude Accuracy: &plun;1dB@100MHz, 0dBm- Amplitude Flatns: &plun;1dB@0dBm- Harmonics: <-30dBc tical- Reverse Power: +30dBm- Impedance: Te: N female, 50Ω minal- RF output VSWR: < 1.5:1 |
| Opt. 02 | AC/DC Battery Operation with Battery Pack | * 11.1V Li-Ion battery pack *2 |
| Opt. 03 | &plun; 1ppm Stability | * &plun;1ppm, 0~50 °C , &plun;1ppm/yr |
| Opt. 06 | GPIB Interface | * IEEE 488 |
| Opt. 12 | EMI Filter (*) | * RBW selections: 9kHz & 120kHz, 6dB bandwidth, Accuracy: 15% |
| Opt. 13 | Demodulator (*) | * Demodulation: AM, FM ; Output: Internal speaker, 3.5mm stereo jack wired for mo operation |
| Opt. 14 | EMI Filters and 300Hz RBW (*) | *RBW Selections: 9kHz and 120kHz,6dB bandwidth 300Hz,3dB bandwidth RBW Accuracy: 15% |
| Opt. 15 | EMI Filters and Demodulator(*) | * RBW Selections: 9kHz and 120kHz, 6dB bandwidth* RBW Accuracy: 15% ; Demodulation: AM, FM* Output: Internal speaker, 3.5mm stereo jack wired for mo operation |
| Opt. 16 | EMI Filters, 300Hz RBW and Demodulator (*) | *RBW Selections: 9kHz and 120kHz, 6dB bandwidth 300Hz, 3dB bandwidth* RBW Accuracy: 15% ; Demodulation: AM, FM* Output: Internal speaker, 3.5mm stereo jack wired for mo operation |
| TE : 1. (*)Only one option could be selected among option 12 to 16 for any given GSP-827 unit 2.All options are factory-installed. | ||
| OPTIONAL ACCSORI | ||
| ATA-001 | BNC Antenna(An additional ADP-001 is needed for fitting GSP spectrum yzers) | |
| ATA-002 | Near Field Probe(An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum yzers) | |
| RLB-001 | Return Loss BridgeRLB Frequency Range 10MHz ~ 1GHz | |
| GTP-3000 | Pive touch Probe SetPR-03: Pive touch probe, A(F)ADP-002: Adaptor, A(J/F) ~ N(P/M)GTL-303: RF Cable embly, A(P/M), 600mm | |
| GKT-001 | General Kit setADP-002: adaptor, A(J/F) ~ N(P/M) x 2ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1GTL-303: RF cable embly(A(P/M),RD316,600mm)x2GSC-002: Kit box x 1 | |
| GKT-002 | CATV Kit setADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2ADP-101: adaptor, BNC(J/F)75Ω ~ BNC(P/M)50Ωx 2GTL-304: RF cable embly(RG223,N(P/M)-N(J/F),300mm)x2GSC-003: Kit box x 1 | |
| GKT-003 | RLB Kit setGAK-001: termination 50 , N(P/M) x 1GAK-002: Cap with chain, N(P/M) x 1GTL-302: RF cable embly(RG223,N(P/M),300mm)x2GSC-004: Kit box x 1 | |
| GKT-006 | EMI Probe Kit setANT-01: 6cm Loop, H-Field Probe x 1ANT-02: 3cm Loop, H-Field Probe x 1ANT-03 6mm Stub tip, E- Field Probe x 1PR-03: Touch Pive Probe x 1 ADP-02: N(P/M)~A(J/F) Adapter x 1ADP-01: N(P/M)~BNC(J/F) Adapter x 1Tt Lead: BNC(P/M)~BNC(P/M) RF Cable x 1Tt Lead: A(P/M)~A(P/M) RF Cable x 1 | |
| GRA-404 | Rack Adapter PanelRack Mounting (19", 4U) | |
| GSC-001 | Soft Carrying Case | |
| GTL-301 | RF CableRG 223 N(P/M), 1000mm | |
| GTL-401 | DC Power CordDC power cord with DC Jack and lighter plug, Current 5A |
