- 臭氧输出:0.1ppm或1.0ppm(根据要求)
OG-3臭氧校准器:
Eco Sensors / OG-3 Ozone Source Calibration Checker臭氧校准器
美国Eco Sensors OG-3臭氧校准器
The OG-3 Ozone Source is for calibration verification and approximate field calibration of Eco Sensors instruments.
It is available in either of two output levels: .1ppm or 1.0ppm of ozone (specify when ordering).
The OG-3 uses a precision UV micro-lamp ozone generator. Its output is adjusted in our laboratory by comparison with a NIST traceable standard.
美国Eco Sensors OG-3臭氧校准器 Specifications技术参数:
Ozone Source: UV lamp
臭氧源:紫外光灯
Output Ozone Concentration: .1ppm (standard) or 1.0ppm (upon request)
臭氧输出:0.1ppm或1.0ppm(根据要求)
Accuracy: 20%
:±20%
Warm-up time: 30 minutes
预热时间:30分钟
Calibration Time: 3 min
校准时间:3分钟
Lifetime: 500+ hours
寿命:500+小时
Temperature range: 10 to 27 °C (50 to 80 °F)
温度范围:10~27℃
Size: 36 × 95 × 160 mm (1.41 × 3.75 × 6.30 in)
体积:36×95×160 mm
Weight: 255 gr (9 oz)
重量:255g
Power requirement: 12 VDC at 300 mA
电源:12VDC或交流电