- 工作形式：
- 电容式液位传感器CPA01
电容式液位传感器CPA01 Filling level measurement with liquids ;
Characteristics CPA01
| Analogous output 4-20mA proportional to filling level 4-20mA比例模拟信号 |
| Max. measurement range 1800mm, also suitable for short measuring 测量范围1800mm，也适用于短量程 |
| Simple calibration at keypress 校准简单 |
| Operating pressure max. 16 bar 工作耐压：16bar |
| Vertical installation 垂直安装 |
| Thread BSP1" and protective tube in stainless steel Ti316 /PVDF, Material housing stainless steel 304 螺纹： BSP1,不锈钢保护管，外壳304不锈钢 |
| Electrical connection : Cable outlet, plug M12 电气连接：电缆连接或M12插头 |
| Measuring accuracy 1% of measurement range 测量：测量范围的1% |
| Tube and sensor beam are exchangeable and can be shortened 探测器长度可变 |
Calibratin 0% and 100% is made at keypress (TEACH IN). Application（应用） For liquids with low dielectricity, such as oil, diesel, emulsions, water, etc., suitable for metal and plastic container 技术参数
| Supply voltage 供给电压 | 12-32VDC |
| output 输出 | 4-20mA ( 2 wire ) |
| Process connection 过程连接 | Standard: BSP 1"of 316 Ti /PVDF, other types on request |
| Connecting box 接线盒 | D67x55mm of stainless steel 304, IP65 |
| Electrical connection 电气连接 | plug M12or cable outlet |
| Medium temperature 介质温度 | -30°C up to +100°C, |
| Environmental temp 环境温度 | -30°C up to +70°C, |
| Max. pressure 耐压 | 1.6 MPa |
| Sensor beam 波长 | Diameter 5mm made in of stainless steel, coated with elastomer - hose |
| Tube length L 管子长度 | max. 1800 mm |
| Accuracy | 1% of measuring length |
