- 品牌/商标：PTL
- 企业类型：贸易商
- 新旧程度：全新
- 原产地：德国
德国PTL 测试指,探针，探棒 IEC61032/VDE0470测试针测试棒 供应进口P10.55测试针
PTL 测试指,探针，探棒用于测试避免接触危险部位和进入固体异物
PTL Access And Object Probes
for testing the protection against access to hazardous parts and against ingress of solid foreign objects
Test Needle Φ0,5mm, 20mm long, a), b), c)
According to
IEC61032/8.90&6.2.1 Fig.12,
VDE 0470 Part 2/ Draft 4.93& 6.2.1 Fig.12 Article No:P10.46
Conical stop, front flat ,interchangeable: metal/plastics,
According to IEC61032/ 8.90&6.2.2 Fig. 13 and 14
VDE 0470 Part 2/ Draft 4.93 & 6.2.2 Fig. 13 and 14 Article No:P10.55
Test Bar width 125mm, 5mm thick, 270 mm long, a), b),
According to IEC61032/ 8.90&6.2.3 Fig. 17
VDE 0470 Part 2/ Draft 4.93 & 6.2.3Fig. 17 Article No: P10. 56
Test Bar width 50mm, 5mm thick, 175 mm long, a), b),
According to IEC61032/ 8.90&6.2.3 Fig. 18
VDE 0470 Part 2/ Draft 4.93 & 6.2.3Fig. 18 Article No: P10. 57
Test Bar width 3mm, 1mm thick, 80 mm long, a), b),
According to IEC61032/ 8.90&6.2.1Fig. 9
VDE 0470 Part 2/ Draft 4.93 & 6.2.1Fig. 9 Article No: P10. 58
Test Bar width Φ6mm, with 90 °tip, 80 mm long, a), b), c)
According to IEC61032/ 8.90&6.2.2Fig. 15
VDE 0470 Part 2/ Draft 4.93 & 6.2.1Fig. 15 Article No: P10. 59
Workmanship: The active parts of the test fingers and-pins consist of hardened stainless stell. The isolating parts are made of POM (Polyoxymethylene)
a) with longitudinal bore Φ 12mm at the end of the handle to pin up at the rod Φ 12mm of a Push and Pull Dynamometer
b) with longitudinal bore Φ 4mm in the handle to connect a test lead with banana plug
c) with radial bore Φ 4mm in the handle to connect a test lead with banana plug necessary if a Push and Pull Dynamometer is mounted
d) with eyelet and key ring at the rod protruding from the handle, to measure pull forces. E.g.with the test Hook P10.40
e) to pin up at a Push and Pull Dynamometer by means of Adapter Φ 12mm/Φ 10mm Article No. P10.61
f) with rod Φ 12mm at one end to apply push forces, e.g. to the probes marked with a)
