盐雾循环试验箱

循环腐蚀试验箱可以模拟各种国际标准（如ASTM B117、ASTM G85、ISO9227、BS3900、DIN50.021等，具体参见下述的标准符合清单）以及汽车行业CCT标准，Ford，Honda，GM，VW，Toyota的自主标准和国标GB中的实验条件对测试材料（例如涂料、钢材等）进行抗腐蚀能力的测试。该测试箱通过对自然环境的模拟和强化，在短时间内可以测出被测材料暴露在相应自然环境中的抗腐蚀能力，从而为用户筛选产品或配方提供数据和依据。

To carry out salt-spray tests in accordance with national and international standards such as 可进行国家和国际标准的盐雾试验，例如  www.ort-lab.com

DIN EN ISO 6270-2(DIN 50017)
DIN EN ISO 9227(DIN 50021)ASTM B117
GM4465P

Particularly energy-saving, heat-insulated compact chest-type design
    特殊节能型绝热箱体设计
Housing and testing chamber made of high-quality glass-fibre reinforced polyester resin on fully laminated steel frame with castors and adjustable feet
 可调节高性能加强型多层玻璃纤维树脂箱体
Double-wall energy-saving testing chamber cover (particularly torsion-resistant and providing insulation)
    节能型箱体（特殊抗扭绝热设计）
Easy handling due to double gas strut support and ergonomically formed handle
    人体工学设计双气动支撑
Testing chamber volume approx. 400 litres  试验容积约400升
Testing chamber seals made of foam silicone profiles 箱体硅树脂密封
Sample depot made of fully non-corrosive and deflection-resistant glass-fibre reinforced plastic round tubes
    全防腐、刚性加强型玻璃纤维塑料样品架
Adjustable high-quality precision binary nozzle made of polycarbonate to generate finest spray mist (absolutely non-corrosive, in particular when used with acetic testing solutions)
可调节高聚碳酸脂双喷头设计以实现喷雾（防腐，特别是酸性溶液情况下）
Large-volume compressed-air humidifier made of V2A steel including a large-surface special filter
    大容积压缩空气V2A钢制加湿器和特殊大表面积过滤器
Function testing of the filter by differential pressure measurement
 过滤器通过高微量压力测量的功能测试
Automatic refill system for deionized water to supply the humidifier system for salt-spray testing. (Required flow pressure of deionized water: 2,5 - 3 bar)
 盐雾试验加湿系统去离子水自动上水 （需要去离子水压：2,5 - 3 bar）
1 supply tank of approx. 75 litres integrated in the unit, for NaCl testing solution

内置75升NaCl溶液储水箱
Easily removable, smooth-wall glass-fibre reinforced plastic design provides for easy control and cleaning of the tank in case of algae formation
    可移动、光滑加强型玻璃纤维塑料设计可实现方便控制、清除微生物形成
Large-surface heating on the outer sides of the testing chamber protected against corrosion, for constant heating
    持续加热试验时外箱体大面积加热以防止腐蚀
Electronic micro-processor controlled temperature control (PID) of testing chamber and humidifier 试验箱PID温度控制
LED-Display resolution of set and actual value 0,1°C. Temperature constancy <± 0,5 K.  数码显示，温度0,1°C，温度波动度<+ 0,5 K
Dosing Pump for test solution (M-TR) 试验溶液给水系统