| 类型 | 高频信号发生器 | 品牌 | 美瑞克 |
| 型号 | RSG-17 |
| [ 产品介绍 ] | ||
RSG-17 100 kHz～150 MHz 高频信号发生器 &sp;&sp;概述&sp; RSG-17型高频信号发生器能满足生产线,业余爱好者及维修等多方面的的频率需求,操作者通过可调的内置调制频率便可准确的判断出所选频段. 基本特性&sp; 频率范围&sp;&sp;&sp;A段:100 kHz～300 kHz B段:300 kHz～1000 kHz C段:1 MHz～3.2 MHz D段: 3 MHz～10 MHz E段: 10 MHz～35 MHz F段:35 MHz～150 MHz (三次谐波可450 MHz ) 频率准确度:&plun;5% 输出电平:空载时约100 mV 输出电平范围: 0 V～100 mV 调制&sp; 1、内部:调幅约0～30%可调节 2、频率范围:150 Hz～1.5 kHz 3、外部:50Hz～20 kHz , 1 V峰值 低频输出: 150 Hz～1.5 kHz ,约3 V , 1000阻挡 电源: AC 110 V / 220 V (50 / 60Hz) , 8 W 使用说明书： GENERAL DCRIPTION RSG-17 is an RF signal generat or which can generate Hi –frequency from 100KHz-150MHz.With it′s3th harmonic on range′F′,450MHz can be reached. As the modulating frequency can be adjusted from 150Hz to 1.5KHz and output terminal for AF as well,it can fulfil most requir em ent of ho bbyist,service station,produion and technical instruruion. &sp; FEATUR Wide Frequency range:100KHz-150MHz Low distortion AF oscillator installed suppling Amplitude Modulation(AM)With tunable range from 150Hz-1.5KHz. AF output terminal works as audio generator as well. ELERLCAL SPECIFICATIONS Range&sp;&sp;A:100KHz-300 KHz &sp;&sp;&sp;&sp;&sp;&sp;&sp;B:300 KHz-1000 KHz &sp;&sp;&sp;&sp;&sp;&sp;&sp;C:1MHz-3.2 MHz &sp;&sp;&sp;&sp;&sp;&sp;&sp;D:3 MHz-10 MHz &sp;&sp;&sp;&sp;&sp;&sp;&sp;E:10 MHz-35 MHz &sp;&sp;&sp;&sp;&sp;&sp;&sp;F:32 MHz-150 MHz &sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;(up to 450 MHz with 3th harmonics) Frequency accuracy on scale:&plun;5％ RF output: Min 100mV rms(up to 35Mhzunloaded.) Output control: 1mV to 100mV(measured from output terminal) Modulation:Amplitude modulation(AM)30％approx. Audio output: Min2Vrms. Audio frequency: 150Hz-1.5KHz Extemal audio input: 50Hz-20KHz at ls than 1Vrms input. Power Requirement: AC110/220V 50/60Hz approx.6VA 1 Dimension: 142(W)&tim;233(D)&tim;197(H)mm 3.5kg Accsori: Power Cord………………1pc &sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;Tt Clip…………………1pc &sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;Instruion Manual………1pc &sp; &sp;
&sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp;
2 &sp; &sp;
&sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp; &sp;
（1）&sp;&sp;&sp;&sp;&sp;&sp;Dial scale Frequency tunning knob. （2）&sp;&sp;&sp;&sp;&sp;&sp;Frequency range seleorA-F （3）&sp;&sp;&sp;&sp;&sp;&sp;Internal/External modulation seleor. （4）&sp;&sp;&sp;&sp;&sp;&sp;Power On/Off. （5）&sp;&sp;&sp;&sp;&sp;&sp;Modulation level adjust. （6）&sp;&sp;&sp;&sp;&sp;&sp;RF level control. 3 （7）&sp;&sp;&sp;&sp;&sp;&sp;Modulationfrequency adjust. （8）&sp;&sp;&sp;&sp;&sp;&sp;RF output terminal. （9）&sp;&sp;&sp;&sp;&sp;&sp;AF output/lnput termindl. （10）&sp;&sp;Power ON indicator. （11）&sp;&sp;AC power input socket with fuse holder. （12）&sp;&sp;Lnput voltage seleor. OPERATION Before input power to power socket(11),make sure TSG-17 has voitage seleor(12)placed on suitabie position. (1)&sp;Prs(4)down,(10)will be lit to show AC power is on. (2)&sp;Prs (2)from A to F to sele the frequency range which yon dire to work on. (3)&sp;Tune(1)to the aual frequency what you need.For accuracy tunning,a frequency Counter(TFC-1250)may be needed to indicate the aualoutput frequency. (4)&sp;To obtain the internal modulation,(3)should not be prsed down.ln the internal modulation mode,(9)will have AF signal out which have frequency controlled by (7). (5)&sp;Ln internal modulation mkde,modulating frequency can be adjusted by(7)while fully antl-clockwise to lowtfrequency and fully clockwise for hight frequency,modulation depthis controlling by(5). (6)&sp;Terminal(9)as as AF outp utin l ntem al modulation mode while as as AF lnput in extemal modula tion mode.modulation mode. (7)&sp;To have RF signal output,simply plugs in the BNC to crocodile clip cord to(8)as accsed. Output level can be controlled by turning(6)fully clokwise for maximum＆fully anti-clockwise for minimum output. &sp; &sp; &sp; &sp; |
