| 品牌 | DLF-Waltron | 型号 | 2410 |
| 测量范围 | 0-99ppm |
规格：
测量范围：1-99ppm
：&plun;10ppm（0~50ppm）；&plun;20%（50-99ppm）
校准：洁净水中直接校准
电流输出：0/4-20mA(820ohm )
报警输出：2个可调操作延迟报警(0-60秒，10-240秒),8A@240V
电源：230Vac 或者24Vac， 10VAmax
操作条件：
| Sample Flow | 0.03 – 0.53 gal/min (0.1 – 2.0 liter/min) | |
| Sample Temperature | 33.8 – 104° F (1 – 40°C) | |
| Ambient Temperature | 33.8 – 131° F (1 – 55°C) | |
| Pressure | 1.45 – 145 psig (0.1 – 10 bar) 90% RH Max @ 131° F (55°C) | |
| Humidity | 90% RH Max @ 55°C |
应用：
| Boiler Condensate Returns:锅炉冷凝器回水 When low pressure steam is used to preheat fuel oil, any tiny leak in the heater can allow traces of the fuel oil to contaminate the condensate. The oil returns to the boiler with the feedwater. Over time, even all amounts of oil will accumulate on heat transfer surfaces causing overheating of the boiler tubes. This results in lost efficiency and in some cases failure of boiler tubes. The oil may react with the boiler treatment chemicals to cause foaming and carryover. If leakage occurs, the Model 2410 provides warning before damage occurs. |
| Process Cooling Water: 过程冷却水 When a process stream containing oil is cooled, if there is a leak in the cooler, oil can contaminate the cooling water stream. Contamination can result in both pollution of the environment and loss of product. The oil-in-water monitor lets the operator know if oil gets into the cooling water. |
| Process Stream Monitoring:过程蒸汽监测 Edible oil processing plants may use steam to aid in the extraction of oil. Regardless of whether the condensate is recycled to the boiler or sent to waste, all traces of oil must first be removed. The Model 2410 monitors the effectiveness of the separation process. |
| Waste Water: 污水 Treated wastewater from oil-handling facilities can be monitored to ure that treatment processes are effective. |
