- 直径：12MM
- 长度：80MM
UL82标准Figure9.2标准试验弯指
标准：符合IEC61032|GB/T16842|UL82|UL998要求;
引用标准：IEC60335/GB4706, GB8898/IEC60065, IEC60598/GB7000, GB4943-2008/IEC60950, IEC60529/GB4208, UL507, UL1278, IEC60745-1/GB3883.1, IEC60884-1/VDE0620-1/GB 2099.1/DS60884-2-D1/IS1293/IEC 60320-1等。
UL82标准Figure9.2标准试验弯指
用途：本试具用于检验防止人体触及危险部件的基本防护。此试具也用于防止手指触及的防护检验。
Apply: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger.
注/Note:
材料：如无其他规定，采用金属。
未注公差角度的极限偏差：+0/-10';
未注公差带一般线性尺寸的公差：25及以下：0/-0.05；25以上：+/-0.2.
Material: metal, except where otherwise specified.
Tolerance on dimensions when no specific tolerance is given:
–on angles: 0/?10’
–on linear dimensions: up to 25 mm: 0.
–0/0,05 mm; over 25 mm: ± 0,2 mm.
两个铰接点可在同一平面内沿同一方向在90°+10’/0范围内转动。
Both joints shall permit movement in the same plane and the same direction through an angle of 90° with a 0° to +10° tolerance.
UL82标准Figure9.2标准试验弯指
技术参数：
1. 弯指直径：12mm
2. 弯指长度：80mm（三节总长度）
3. 挡板直径：50mm
4. 挡板长度：100mm
UL82标准Figure9.2标准试验弯指
