日本COCORESEARCH TDP-3921-R 周期速度计 测速计 原装
|
Features |
● | High speed analog output |
The measured value can be transmitted as -10 to 10V analog signal (0 to 10V when input is single phase pulse) to other devices / system such as data logger or PLC. The polarity of analog output follows the direction of rotation of pulse generator. The analog signal can be scaled, e.g. 0 to 10V = 0 to 8000rpm. Where as the updating time is 1ms. | |
● | Wide range |
Input frequency range is 0.0006Hz to 100kHz without any change in range. The display accuracy is 20ppm±1digit. | |
● | Employing PERIOMATIC technology |
The forecast computation PERIOMATIC, versatile software, is the principle of working of TDP-3921-R. It enables the user to get analog output voltage even in the presence of heavy fluctuations. The PERIOMATIC has stop (zero speed) forecasting function, so the TDP-3921-Rimmediately responds to sudden stop of the incoming pulses. | |
● | Compatibility to variety of Inputs |
The TDP-3921-R can directly be connected to varying sensors like AC magnetic pickups, rotary encoders, proximity sensors, and pulse output devices. The TDP-3921-R can detect the direction of rotation of pulse generators and indicate it by minus or plus sign on LED display and analog output when 2 phase signals are applied. | |
● | Large 14.2mm bright LED display with fixed or floating decimal point |
● | Three kinds of averaging function, time average, moving average, and pulse dividing average are used to dealt with irregular and heavily laden with fluctuation incoming pulses. |
● | It offers independent and programmable updating times of display and analog output |
Specifications |
Name | Periomatic tachometer |
Model | TDP-3921-R |
Measurement | PERIOMATIC processing |
【Input】 | |
Number of inputs | 1 |
Input frequency range | 0.0006Hz-100kHz |
Resolution | 102ns (9.8MHz) |
Input method | 1)Single phase pulse 2)UP/DOWN signals of 2 inputs (separate pulse) 3)2 phases A and B with 90phase difference |
Input pulse width | MIn.4s (both H level and L level) |
Input lovel | Logic : logic signals of more than 3.5V in H level and less than 1V in L level Zerocross : alternative signal between 100mV to 30V |
Withstand voltage | 30V |
Input connector | Terminal block (7.62mm intervals, M3 terminal screw) |
Sensor power supply | +12V 50mA max |
【Processing】 | |
Measurement mode | Frequency meter mode / Period meter mode |
Operation rate | Setting the displayed value against input frequency Input frequency rate : 0.00001-999999 (Hz) Display rate : 0.00001-999999 |
Dividing rate (pulse average) | 1-999 (divided frequency by software) |
Number of moving average | 1-8 |
Dynamic forecast | 8 steps (continuous estimate and, one cycle maintaining are included) |
Chatter suppressing function | The chattering is removed |
Dual range | Setting two kinds of operation rate |
Memory of the set value | INonvolatile memory (EEPROM) |
【Display】 | |
Displayed colors | Red LED |
Display | 7 segments of LEDs, character height is 0.56" inches (14.2mm) |
Display digits | 6 digits |
Range of display | -199999-999999 |
Display of polarity | -means lighting, +means no lighting |
Over display | By the OL display |
Zero display | Reading of zero suppression |
Position of decimal point | Automatic range and fixed range □□□□□□.- □.□□□□□ |
Display update time | 0.1-99.9s |
Display accuracy | 20ppm 1 digit @23 |
【Analog Output】 | |
Output voltage range | 10V |
Resolution | About 10000 (-10V - +10V) |
Output updating time | 0.001-99.99s |
Full scale setting range | Display value setting in full scale (0.00000-99999) |
Load resistance | Min. 4.7k |
Output accuracy | Max. 0.2% of full scale @23 |
Temperature fluctuation | Max.200ppm/ |
Linearity | Max. 0.1% |
【Comparator Output】 | |
Number of channels | 2 channels (HIGH and LOW) |
Output signal | Isolated noncontact output (photo moss relay) |
Rating | DC 350V maximum 80mA (resistance load) AC240V maximum 80mA (resistance load) |
ON resistance | Under 50 |
Updating time | Synchronization is selected for display updating time and analog output updating time |
Response time | Max. 3ms |
Output connector | Terminal block (7.62mm intervals, M3 terminal screw) |
【RS-232C】 | |
Communication method | Asynchronous commmunication method |
Communication level | Serial communications by RS-232C |
Communication parameter | Fixed at baud rate of 2400bps |
Communication connector | Hexpole plug-in phone jack |
Output timing | Communication output of displayed data at every display updating |
【General】 | |
Power supply input *factory delivery option) | TDP-3921-RA10 AC100V 10% 50/60Hz TDP-3921-RA11 AC115V 10% 50/60Hz TDP-3921-RA20 AC200V 10% 50/60Hz TDP-3921-RA23 AC230V 10% 50/60Hz TDP-3921-RDF DC9.6-30V |
Electric power consumption | Max. 8VA |
Outside dimentions | 96 (W) × 48 (H) × 150 (D) mm DIN standards |
Weight | Approximately 700g |
Operating temperature & humidity limits | 0 to +40 / Under 85%RH (no dewing) |
Storage temperature | -20 to +70 |