防意外接触规(防触电)Protection against accidental contact during insertion (IEC 7006-55-2)
The gauge is shown in the test position. In the rest position, the plunger shall be above plane V.
图中所示量规柱塞处于检验状态。当柱塞处于静止状态时,W面应比V面缩进更深些。
E14-7006-55-2防触电接触规
Reference 尺寸符号 | Dimension 尺寸(mm) | Tolerance 公差(mm) | Reference 尺寸符号 | Dimension 尺寸(mm) | Tolerance 公差(mm) |
D | 13.97 | +0.0/-0.02 | Q | 15 | ±0.1 |
F | 18.1 | +0.05/-0.0 | R | Approx.近似12.5 | |
G | 19 | +0.02/-0.0 | U | 8 | ±0.1 |
H | 7.5 | ±0.1 | r | <0.5 | |
M | 27.5 | ±0.1 | r1 | 2.5 | +0.5/-0.0 |
N | 28.5 | +0.0/-0.02 | α | 35° | ±30’ |
P | 10 | ±0.1 |
Purpose目的:
To check protection againstaccidental contact during insertion of caps E14 on finished lamps.
检验成品灯上E14灯头在插入时防止意外接触性能。
E14-7006-55-2防触电接触规
Testing测试方法:
The shape of the lamp with regard to protection againstaccidental contact is assumed to be correct if, when the lamp is pushed as far as possible into the gauge, surface W does not protrude beyond surface V. The application of this gauge is restricted to the following lamps when they are fitted with E14 caps, in accordance with sheet 7004-23: candle lamps/round bulb lamps/domestic tubular lamps/pygmy lamps.
如果灯头完全插入量规时,W面没有凸出V面,则可认为灯的防意外接触性能是合格的。此量规仅适用检验装有符合IEC7004-23中所示的E14灯头的烛形灯,球形灯,家用管形灯和小型灯。