0-氧气分析仪 型号:HY84/5100库号:M396982 概述
NTRON
新推出的5100P 是一款价格便宜、使用寿命长的便携式的氧化锆分析仪。型号5100P
采
用迷你氧化锆传感器。这种传感器技术比其他传统技术更占优势。因而更具稳定、寿命长。3-5 年
的典型应用!
特点
● 长寿命的传感器
(3-5 年)
● 提供多种的输出
● 预热时间短: 2 分钟
● 能使用于大气中或在实际气压的抽样中!
●
感应器不会干燥或冻结
● 体积小,可携带
● 内置取样泵
● 传感器不受位置影响
● 超大,高亮度显示
● 标准输出:RS-232
通讯接口,4-20MA ,
● 电压输出,继电器报警
The Ntron Model 5100 provides an
affordable and versatile Oxygen Analyzer solution ideal for portable and fixed
gas generation standard process monitoring. The unit delivers high-purity gas
measurement in a range from 0-1% through to 0- in an auto range or fixed
range modes.
A small footprint and compact size makes the Ntron 5100
easy to install. The unit’s expected operational life is five to ten
years.
The low-maintenance, long-life Zirconia sensor has virtually
unlimited shelf life and will not dry out or freeze.
Specifications:
Sensor: Mini Zirconia Sensor
Measurement Range:
0-1%/0-10%/0-25%/0-50%/0- auto range or fixed range
Display: 0.75”
(19.05mm) LED digital display, Color coded LEDs for system status, Alarms
1&2= RED, system fault= YELLOW, OK and online= GREEN
Response Time:<15 sec. for 90% step change
Intrinsic Error (accuracy):
At
constant temperature: ±2% range
Over operating temperature: ±5% range
When
calibrated @ target concentration @ STP: ±1% range
Operating Temperature: 5
to 45o C
Signal Interface: RS-232 service port, 4-20mA negative ground,
0-10VDC range ID and choice of 0-1VDC or 0-5VDC or 0-10VDC analog oxygen
signal
Alarm Outputs: Two alarms with adjustable form C relay outputs.
Configurable for fail-safe or fail-alarm mode, ascending or descending trip. One
system fault relay.
Sample Port: 1/8” NPT female ports
Electrical
Connections: Removable terminal blocks on back of analyzer
Power,
Analyzer: 5W at 115/230VAC 50/60Hz, single phase or 10 Watts @ 12-30VDC (battery
backup capability)
Environmental Ratings, Analyzer:
Faceplate: NEMA
type 4, IP66
Housing: NEMA type 1, IP20
Warranty: Electronics and sensor:
One yr.
Weight: Analyzer: Less than 2 lb. (0.9 kg)