西门子6ES7323-1BL00-0AA0模块

产品价格：: 电议

产品型号：: 6ES7323-1BL00-0AA0

产品品牌：: 西门子

供应商等级：: 免企业未认证

经营模式：: 贸易商

企业名称：: 希殿电气技术（上海）有限公司

所属地区：: 上海市

发布时间：: 2017/12/8 13:58:41

021-60541249 18621061383

康奎先生(联系我时，请说明是在维库仪器仪表网看到的，谢谢)

QQ咨询进入商铺

企业档案

希殿电气技术（上海）有限公司

免企业未认证证营业执照已上传

经营模式：贸易商

所在地：上海市

主营产品：西门子SIEMENS

进入商铺在线咨询

产品搜索

产品分类

PLC控制器模块

变频器

触摸屏.面板

数控伺服驱动

工业以太网

功能

数字量输入/输出模块转换

来自过程的外部数字信号电平转换成控制器内部信号电平
将控制器的内部信号电平转换成过程所要求的外部信号电平。

SM 327 是一个可升级的I/O模块。共有16个通道，其中8个通道是固定的，另8个通道可分别用作输入或输出。因此，该组和模块可以灵活地满足任何组合的需要。

技术规范

Article number	6ES7323-1BH01-0AA0	6ES7323-1BL00-0AA0	6ES7327-1BH00-0AB0
	SM323, 8DI/8DO, DC24V, 0,5A	SM323, 16DI/DO, DC24V, 0,5A	SIMATIC S7-300, DIGITAL MODULE
Supply voltage
Load voltage L+
● Rated value (DC)	24 V	24 V	24 V
● permissible range, lower limit (DC)	20.4 V	20.4 V	20.4 V
● permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V
Input current
from load voltage L+ (without load), max.	40 mA	80 mA	20 mA
from backplane bus 5 V DC, max.	40 mA	80 mA	60 mA
Power loss
Power loss, typ.	3.5 W	6.5 W	3 W
Digital inputs
Number of digital inputs	8	16	8; 8 hard-wired, 8 others individually parameterizable
Input characteristic curve in accordance with IEC 61131, type 1	Yes	Yes	Yes
Number of simultaneously controllable inputs
horizontal installation
— up to 40 °C, max.		16
— up to 60 °C, max.	8	8	16
vertical installation
— up to 40 °C, max.	8	16	16
Input voltage
● Type of input voltage	DC	DC	DC
● Rated value (DC)	24 V	24 V	24 V
● for signal "0"	-30 to +5V	-30 to +5V	-30 to +5V
● for signal "1"	13 to 30V	13 to 30V	+15 to +30V
Input current
● for signal "1", typ.	7 mA	7 mA	6 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", min.	1.2 ms	1.2 ms	1.2 ms
— at "0" to "1", max.	4.8 ms	4.8 ms	4.8 ms
— at "1" to "0", min.	1.2 ms	1.2 ms	1.2 ms
— at "1" to "0", max.	4.8 ms	4.8 ms	4.8 ms
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m
● unshielded, max.	600 m	600 m	600 m
Digital outputs
Number of digital outputs	8	16	8; can also be parameterized individually as DI
Short-circuit protection	Yes	Yes	Yes
● Response threshold, typ.	1 A	1 A	1 A
Limitation of inductive shutdown voltage to	L+ (-53 V)	L+ (-48 V)	L+ (-54 V)
Controlling a digital input	Yes	Yes	Yes
Switching capacity of the outputs
● on lamp load, max.	5 W	5 W	5 W
Load resistance range
● lower limit	48 ?	48 ?	48 ?
● upper limit	4 k?	4 k?	4 k?
Output voltage
● for signal "1", min.	L+ (-0.8 V)	L+ (-0.8 V)	L+ (-1.5 V)
Output current
● for signal "1" rated value	0.5 A	0.5 A	0.5 A
● for signal "1" permissible range, min.	5 mA	5 mA	5 mA
● for signal "1" permissible range, max.	0.6 A	0.6 A	0.6 A
● for signal "1" minimum load current	5 mA	5 mA
● for signal "0" residual current, max.	0.5 mA	0.5 mA	0.5 mA
Output delay with resistive load
● "0" to "1", max.	100 μs	100 μs	350 μs
● "1" to "0", max.	500 μs	500 μs	500 μs
Parallel switching of two outputs
● for uprating	No	No	No
● for redundant control of a load	Yes; only outputs of the same group	Yes; only outputs of the same group	Yes; only outputs of the same group
Switching frequency
● with resistive load, max.	100 Hz	100 Hz	100 Hz
● with inductive load, max.	0.5 Hz	0.5 Hz	0.5 Hz
● on lamp load, max.	10 Hz	100 Hz	10 Hz
Total current of the outputs (per group)
horizontal installation
— up to 40 °C, max.	4 A	4 A	4 A
— up to 60 °C, max.	4 A	3 A	3 A
vertical installation
— up to 40 °C, max.	4 A	2 A	2 A
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m
● unshielded, max.	600 m	600 m	600 m
Encoder
Connectable encoders
● 2-wire sensor	Yes	Yes	Yes
— permissible quiescent current (2-wire sensor), max.	2 mA	1.5 mA	1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No	No
Interrupts/diagnostics/status information
Alarms	No	No	No
Diagnostic functions	No	No	No
Diagnostics indication LED
● Status indicator digital input (green)	Yes	Yes	Yes
● Status indicator digital output (green)	Yes	Yes	Yes
Potential separation
Potential separation digital inputs
● between the channels	Yes	Yes	No
● between the channels, in groups of	8	16
● between the channels and backplane bus	Yes; Optocoupler	Yes; Optocoupler	Yes; Optocoupler
Potential separation digital outputs
● between the channels	Yes	Yes	No
● between the channels, in groups of	8	8
● between the channels and backplane bus	Yes; Optocoupler	Yes; Optocoupler	Yes; Optocoupler
Isolation
Isolation tested with	500 V DC	500 V DC	500 V DC
Connection method
required front connector	20-pin	40-pin	20-pin
Dimensions
Width	40 mm	40 mm	40 mm
Height	125 mm	125 mm	125 mm
Depth	120 mm	120 mm	120 mm
Weights
Weight, approx.	220 g	260 g	200 g