您好,欢迎来到维库仪器仪表网 网站登录 | 免费注册 | 忘记密码
商铺首页 公司介绍 公司动态 产品中心 技术资料 在线留言 联系我们
SenseAir森尔二氧化碳传感器
SenseAir森尔二氧化碳传感器
  • SenseAir森尔二氧化碳传感器
扫一扫

扫一扫
进入手机店铺

SenseAir森尔二氧化碳传感器

产品价格:
电议
产品型号:
SenseAir S8
供应商等级:
企业未认证
经营模式:
工厂
企业名称:
深圳市源建传感科技有限公司
所属地区:
广东省深圳市
发布时间:
2017/9/6 16:52:11

产品搜索

手机访问

扫一扫
进入手机店铺

  • 型号/规格:SenseAir S8
  • 品牌/商标:SenseAir
  • 是否原装:
  • 新旧程度:全新

SenseAir森尔二氧化碳传感器



SenseAir森尔二氧化碳传感器概述


  深圳源建传感器科技有限公司代理销售SenseAir森尔二氧化碳传感器,我们的产品保证百分百原装进口!当然您有什么SenseAir S8传感器使用过程中的问题也可以向我们进行电话咨询!深圳源建为您提供更的SenseAir S8传感器服务!



SenseAir森尔二氧化碳传感器相关参数

  Item: SenseAir S8

  Target gas: CO2

  Operating Principle:Non-dispersive infrared (NDIR)

  Measurement range: 400 to 2000 ppm (Note 1). 0 to 10000 ppm extended range (Note 2)

  Measurement interval: 4 seconds

  Accuracy :±40ppm ±3% of reading (Notes 3 and 4)

  Pressure dependence: + 1.6 % reading per kPa deviation from normal pressure

  Response time: 2 minutes by 90%

  Operating temperature:0 to 50° C

  Operating humidity: 0 to 85% RH non condensed

  Storage temperature: -40 to +70 C

  Dimensions: 33.5 x 20 x 8.5 mm (max dimensions)

  Weight: < 8 grams

  Power supply: 4.5 V to 5.25 V unprotected against surges and reverse connection

  Power consumption: 300 mA peak, < 18 mA average.

  Life expectancy: 15+ years



SenseAir森尔二氧化碳传感器额定值

  压力大于表中列出的5月2日对设备造成性损坏。这些评级

  只有压力等级吗?。设备在任何情况下的操作。

  这些规范的操作部分不是隐含的。暴露于额定值

  延长周期可能影响设备的可靠性。


SenseAir森尔二氧化碳传感器实拍图


SenseAir森尔二氧化碳传感器校准说明


  Rough handling and transportation might result in a reduction of sensor reading accuracy. With time,

  the ABC function will tune the readings back to the correct numbers. The default “tuning speed” is however limited to about 30-50 ppm/week.

  For post calibration convenience, in the event that one cannot wait for the ABC algorithm tocompensate for possible calibration offset two manual calibration procedures are offered. A switchinput is defined for the operator or master system to select one of the two prepared calibration codes.

  Optional calibrations are bCAL (background calibration), which requires that the sensor is exposed to fresh air (400 ppm CO2) and CAL (zero calibration), which requires the sensor measuring cell to be completely evacuated from CO2 e.g. by exposing it to Nitrogen or Soda Lime CO2 scrubbed air.

  Make sure that the sensor environment is steady and calm!

  (粗略的搬运和运输可能会降低传感器的读数。随着时间的推移,

  ABC函数将读数调整到正确的数字。然而,默认的“调谐速度”限制在大约30-50 ppm /周。

  用于校准后的方便,如用于校准ABC算法可能无法抵消补偿等提供了两个手动校准程序。一个开关量输入定义的算子或主系统选择一个准备校准规范。

  可选的校准BCAL(背景校正),这就要求传感器暴露于空气清新(400 ppm的CO2)和CAL(校零),这就要求传感器测量细胞完全撤离CO2通过暴露于氮或二氧化碳空气擦洗碱石灰。

  确保传感器环境稳定、平静!)


提示:您在维库仪器仪表网上采购商品属于商业贸易行为。以上所展示的信息由卖家自行提供,内容的真实性、准确性和合法性由发布卖家负责,请意识到互联网交易中的风险是客观存在的。 请广大采购商认准带有维库仪器仪表网认证的(金牌会员、VIP会员、至尊VIP会员、百维通)供应商进行采购!
个人中心
顶部
立即询价
手机访问

扫一扫
进入手机店铺