您好,欢迎来到维库仪器仪表网 网站登录 | 免费注册 | 忘记密码

咨询电话SERVICE LINE

86 0769 23024013

13823594290

商铺首页 公司介绍 公司动态 产品中心 技术资料 在线留言 联系我们
扫一扫

扫一扫
进入手机店铺

供应智能考勤门禁系统 产品型号:SURPA -8888润丰源电子厂生产

产品价格:
电议
产品型号:
8888
供应商等级:
企业未认证
经营模式:
工厂
企业名称:
深圳市宝安区润丰源电子 厂
所属地区:
广东省
发布时间:
2011/6/7 11:35:04

86 0769 23024013      13823594290

龚强先生(联系我时,请说明是在维库仪器仪表网看到的,谢谢)

企业档案

深圳市宝安区润丰源电子 厂

企业未认证营业执照未上传

经营模式:工厂

所在地:广东省

主营产品:防静电仪器:;在线监视仪;表面电阻测试仪;手腕带测试仪;人体综合测试仪;砝码式阻抗仪;离子风机;智能监控:;防静电门禁;智能监控系统;静电监控数据系统;防静电耗材:;防静电毛刷;防静电镊子;防静电笔;防静电手腕带;防静电手套;防静电鞋;防静电脚筋带;SMT上下料架;

产品搜索

手机访问

扫一扫
进入手机店铺

类型智能门禁系统品牌SURPA
型号8888测量范围750K-100M
+/-10%LCD显示更新LED灯、指示灯显示。
重量70(kg) 外形尺寸1200*280*1000*(mm)

三辊闸使用说明书

Tripod turnstile operation instruction

1.选择安装三辊闸的位置,固定三辊闸.

1. Choosing installation position of tripod turnstile and fixing it.

2.闸杆的装配(见图1)Assemble of rod.

 

闸杆

1).把闸杆放入铝盘安装槽中;  

1)Putting the rod in the installation flume of aluminium tray.

2).把定位片(location unit)装入铝盘销孔;

2)Putting the location unit in the aluminium tray.

3).把定位片(location unit)装到位,螺钉紧固即可。

3)Confirm location unit was installed exactly ,fixing the screw .

 

Aluminium tray

screw

                                                                              rod

Location  unit

Pic 1

 

3.安装与测试

3.Installation and testing

(1)SURPA-5802表头安装在三辊闸开口处,用固定夹固定后,用螺丝固定.

(1)Installing SURPA-5802 meter on the open position of tripod turnstile, using clip fix the meter and then using screw.

 

(2)SURPA-5802表头”right”面插孔为仪器信号线端,DC直径2.5的插头插入,信号线另一端连接4&5.假如所指箭头往表头方向,请把4.5线交换位置即可.

(2)The socket be located at SURPA-5802 right side is the signal termination,plugging a socket (diameter 2.5)into the signal termination,the another end of signal cable connect to 4 & 5 hole.(see Pic 2)If the arrow directs to meter position,please change the position of signal cable 4 &5.

 

(3)SURPA-5802”left”面插孔为仪器DC 12 V电源插头,DC插头为直径3.5电源适配器.

(3)The socket be located at SURPA-5802 left side is the DC 12V power adaptor(diameter 3.5)

 

(4)仪器底部为左右脚测试插孔,”1”线连线端子测试踏板的左边,用于测试左脚,”2”线连接测试踏板的右边,用于测试右脚.

(4)The bottom of the meter are testing jacks of feet,using cable “1”connecting  left footstand,left foot can be tested,using cable”2”connecting  right footstand,right foot can be tested.

 

(5)把工厂电源接入三辊闸内部,连接1 & 2(见图2)

(5)Inserting power which used in the factory into the inside of tripod turnstile,plugging into 1 &2 hole.(see Pic 2)

ON

 

 

AC 220V 50HZ  power

OFF

 

 

1

2

4

3

6

5

.                         

                                       Pic 2

 

4.此设备为单方向通行(见附图3)

(1)  This equipment is single way:

 

 

Location turntable

Left location

Right location

Right single way screw

Left single way screw

                                         Pic 3

  

(2)检查接线是否与接线图一致,检查所有插头是否有松动:检查设备是否接地可靠;确认无误后可上电调试。

(2)Checking if coils are in accordance with the above pictures,if all plugs slack or not,if all equipment be grounded .When you confirm all is ok,testing can be proceed

 

4 . Function testing

(1)开闸功能测试:当三辊闸有开闸信号后,三辊闸会自动解锁,通行方向指示器变为绿色箭头,等待行人进入,当超过设定时间后仍无人通行,设备会自动复位。

(1)Opening floodgate test:when tripod turnstile has openning floodgate signal,tripod turnstile will be automatially operated,the indicator will become green arrow and await passengers going through.Systems automatically reposition if passenger does not pass in regulated time.

 

(2)落杆功能测试:切断电源,闸杆落下;接通电源后电磁铁会产生磁力,即可进行手动升杆;.升杆方法:先用力压杆然后再抬杆至水平位置卡住即可。

注意:测试过程中突然断电,闸杆落下,但通电后一定要用手压杆然后抬杆至水平位置,测试方可继续

(2)Dropping rod test:when it’s powered off,the rod will automatically drop.when it’s powered on electromagnet will cause magnetism,so we can go up rod by hand.Rod rise method:Press rod down with great strength and then lift rod to level postion.

ATTENTION:If operator meet interruption of power supply suddenly during test,the rod will automatically drop,but when it’s powered on again,operatorMUSTpress rod down with great strength and then lift rod to level postion,testing can be proceed.

 

5.注意事项:

5 .Attention:

    (1)在搬运安装三辊闸过程中,当心不锈钢划伤手.

1)During transit and installation,please take notice of stainless steel lacerating hands.

(2)未经许可,设备上请勿添加外围设备且确保系统接地可靠,保证设备工作的安全可靠

(2)Don’t add additional equipment outside tripod turnstile without permission and make sure ground system is reliable.

(3)上述指引如有不明,请联系供应商。

(3)Any questions about the instructions,please contact supplier:HZR ESD LIMITED.

 

 

 

 

 



                                     

Parameter参数

1.Structure:import 304 stainless steel                结构:进口304不锈钢        

2. Floodgate weight:70.00KG                       闸重量:70KG 

3.Size:1200x280x1000H mm                       外型尺寸:长1200×280×1000mm

4.Length of shaft:500mm                           闸杆长:500(mm) 
5.The shaft can bear the max weight:80.00kg         
闸杆承受力:80Kg 
6.Working drive:3.00kg                             
闸杆工作驱动力:3Kg
7.Transmission way:motor-driven(Mechanical)        闸杆传动方式:电动(机械传动)

8.Turn direction: Single way                        闸杆转向 :单 向

9.Switch time :≤1 seconds                         开关时间 ≤1
10.Average trouble-free running: ≥500000 hours      
平均无故障运行时间:≥500000小时

11.Speed of pass through:40 times per minute         通行速度:40人次/
12.Lights indication:Green/pass,Red/prohibit         
灯光提示:绿灯通行,红灯禁止通行

13.Trouble status:going through by oneself without electricity  故障状态:断电后可自行通行                               

14.Outer shell protect:seal up &waterproof                  外壳防护:密封防水          

15.Control&examine place:3                               控制及检修口:3  

16.Pack:wooden case                                    包装:木箱

 

 



联系方式

深圳市宝安区润丰源电子 厂

联系人:
龚强先生
手机:
13823594290
传真:
86 755 27670307
所在地:
广东省
类型:
工厂
地址:
广东省东莞市嘉湖山庄嘉辉苑17座3A

服务热线

86 0769 23024013

提示:您在维库仪器仪表网上采购商品属于商业贸易行为。以上所展示的信息由卖家自行提供,内容的真实性、准确性和合法性由发布卖家负责,请意识到互联网交易中的风险是客观存在的。 请广大采购商认准带有维库仪器仪表网认证的(金牌会员、VIP会员、至尊VIP会员、百维通)供应商进行采购!
个人中心
商家电话

人工服务电话
86 0769 23024013

顶部
立即询价
手机访问

扫一扫
进入手机店铺