Tango454手动三坐标测量机

详细说明：

符合人机工程学的设计

Ergonomic design

测量软件REFLEX software

REFLEX 是一款全三维的手动坐标测量软件包。它同样可替代其它的厂房中的工具如高度规,千分表和卡尺。本软件的主要优点是它非常易于使用。菜单和使用者所需输入的信息被减到少。Tango454有可识别被测元素的“元素识别”功能。这软件的策略“尽管测量”,在测量点后软件自动构造并返回被测元素。

REFLEX is a full 3-D manual coordinate measuring software package. It is also a substitute for a variety of other tools common on the shop floor such as height gauges, dial indicators and calipers. The key strength of the software is its amazing ease of use. Menus and input from the operator have been reduced to an absolute minimum.Tango454 incorporates a "Feature Recognition" capability which “knows” what type of feature the operator is inspecting. The strategy of this software is "Just Measure". After the points are collected the software returns a construction of the inspected feature automatically.

测量结果可用选项中等的打印机以图形或文本的形式打印。还可提供一个内部统计分析软件和选项将测量结果以不同格式传向一台外部数据集合装置。实际球心的数据可以ASCII码的形式通过一个系列接口传至外部计算机以供进一步分析。

Measurement results can be printed on an optional printer in text or graphic form. An internal statistics package is included as well as the option to send measurement results to an external data collection device in a variety of formats. The actual ball center data can also be sent to an external computer in an ASCII file via a serial port for further analysis.

技术参数Technical Specifications：

◇ 行    程Measuring Strokes：X轴 X Axis: 460 mm

Y轴Y Axis: 510 mm

Z轴 Z Axis: 420 mm  

◇ 结构型式Structure Type ：移动桥式Moving Bridge

◇ RENISHAW开放式光栅尺Incremental Linear Encoders (Open Model)

◇ 机    台：高花岗岩平台

Measuring Table :High precision granite measuring table

◇ 整机尺寸Overall Dimension(LWH)：970 m m X 930 m m X 1620 m m

◇ 整机重量Machine Weight：190 Kg

◇ 长度测量允许示值误差Maximum permissible error of indication of a CMM for size measurement (mm) ：MPEE= 3.5 +L/300

◇ 长度测量允许示值误差 Maximum permissible error of indication of a CMM for size measurement (mm) ：

MPEE= 3.5 +L/300    （20±2）°C

MPEE= 5.0 +5L/1000  （20±4）°C

允许探测误差 Maximum permissible Probing Error (mm)：

   MPEP=4.0   （20±2）℃

   MPEP=5.0   （20±4）℃

环境条件要求Environment Specifications：

测量机室温度要求Room Required Specifications

测量机室的温度Room Temperature:: 18 - 22 °C

机器周围环境的温度梯度Max. Temperature Gradients: 1 °C/h，2 °C/24h，1 °C/m

◇ 供气系统Air Supply System

小供气压力Min. Air Pressure   : 0.4 Mpa

耗气量Air Consumption: 50 L/min

◇ 供电系统Electrical Requirements

电压Voltage: 220 V ± 10%

耗电量Max. Power Consumption: 200W

用电设备要求接地可靠：接地电阻小于4欧姆

A good earth ground(less than 4 Ω) is required for reliable operation of the electrical controls.